top of page
Без имени-2.png
Kemiline TA 335

Rheology modifier

Scope of application:
waterborne paints and coatings

— Kemiline TA 335 is used as a thickener in water soluble systems
— this product offers an easy and convenient method of adjusting the viscosity and has excellent rheological properties
— develops viscosity when neutralizing pH in the range of 7.5 - 10.0

Chemical nature:
hydrophobically modified anionic alkaline swelling emulsion (HASE)

Appearance: milky liquid
pH value: 3.0 ± 1.0 (at 20°C)
Viscosity: max. 500 (Brookfield, 5/50 at 20°C)
Ionicity: anionic
Packing: barrels 120 kg
Shelf life: 12 months at temperatures from 5 — 30 ° C
Storage and transportation only at positive temperatures

we recommend adding a small amount of ammonia 1-3 g/kg to the system and mixing well before adding Kemiline TA 335 as the thickener is acidic. Kemiline TA 335 is injected directly into the system while mixing.
Due to the acidic nature of Kemiline TA 335, a slight decrease in system pH will occur when Kemiline TA 335 is added. If the pH drops below 7.5, no further thickening occurs, so the addition of an ammonia solution must be done to keep the pH above 7.5. It should be noted that a further slight increase in system viscosity may occur during storage.

Before using this product, we advise you to carefully read the Safety Data Sheet.

For more information, please contact us:
Phone +38 (048) 704 53 62

Serpa does not recommend the use of these products where patent or other rights may be infringed.

2015 — 2022 Serpa LLC 

Без имени-2.png
bottom of page