top of page
Без имени-2.png
Kemiline CE 808 EU

An APEO-free general purpose styrene-acrylic binder for interior and exterior matt and semi-gloss paints, plasters, tile adhesives, silicone and silicate based coatings, damp proof coatings, cold seal adhesives and high build textured coatings.

Areas of use:
paints, primers, building materials and coatings

Main characteristics:
Provides high abrasion resistance, water resistance and alkali resistance in paints with a higher RFC content.
The high bonding power and weather resistance of Kemiline CE 808 EU make it a multi-purpose product suitable for use in paints, other coatings and adhesives.

— applicable for exterior and interior paints, texture coatings, plasters, etc.
— has a high degree of photochemical stability of the film
— excellent wear resistance, good hiding power, high gloss and color stability
— unplasticized
— does not contain APEO
— does not require marking in EU countries

Chemical nature: styrene - acrylic polymer dispersion

Typical properties:
Appearance: high viscosity creamy liquid
Solid content: 49 — 51% (1g, 30 min at 150℃)
pH level: 7.0 — 9.0 (at 20℃)
Viscosity: 5000 — 16000 cps (Brookfield, 5/20 at 20℃)
MFFT / TG: 20℃ / 23℃
Packing: 120 kg PE drums / 1000 kg IBC containers
Shelf life: 12 months at 5 — 35℃.
Frost resistance: store at positive temperatures
Security: no special conditions

the amount of Kemiline CE 808 EU in the formulation depends on the amount of pigments and fillers. Recommended dosages are about 10-15% for interior coatings and 20-30% for facade coatings. The film forming temperature can be lowered by using coalescents.

Important conditions for storage and use of the product:

— the shelf life of the product is 12 months from the date of production indicated on the label and indicated in the certificates of analysis, when stored at a temperature of 5 to 35 ℃, away from sunlight in a cool, dry place.

— the product must be stored under hygienic conditions to avoid microbiological attack, although it contains certain biocides. Addition of additional biocides may be required depending on site conditions such as high storage temperatures and suspected product contamination during handling. Bulk material storage tanks need to be checked and cleaned from time to time depending on the conditions.

— avoid direct contact of metal parts with this product during storage and use. It is recommended to keep storage tanks, IBCs and drums tightly closed to avoid moisture loss and to keep headspace saturated with water vapor to prevent skin formation at the top and protect the product from microbiological attacks.

— material packed in IBC and drums is recommended to be mixed before use. The product may form lumps and peel due to its film-forming nature. For this reason, it is recommended to strain through a coarse filter before use.

— handle the product with normal safety precautions. Material safety data sheets must be read before using the product. It is recommended to use personal protective equipment such as gloves and goggles when handling the product.
Без имени-1.png

Before using this product, we advise you to carefully read the Safety Data Sheet.

For more information, please contact us:
Phone +38 (048) 704 53 62

Serpa does not recommend the use of these products where patent or other rights may be infringed.

2015 — 2022 Serpa LLC 

Без имени-2.png
bottom of page