top of page
Без имени-2.png

Kemiline CE 756 EU

General purpose, multi-purpose, APEO-free, styrene-acrylic binder for building chemicals, plasters, elastomeric wall coverings, crack fillers, flexible sealants, cold seal adhesives, and indoor and outdoor flexible paints.

Areas of use:
construction and paints, coatings, concrete modifiers, crack fillers.

Main characteristics:
— suitable for waterproof and elastic sealants
— provides good elasticity, water resistance and the ability to bind pigments.
Particularly suitable for making flexible wall coverings, waterproofing coatings and flexible sealants.
— improves the physico-chemical properties of the cement mortar.
— provides high wear resistance of paints
— does not contain APEO
— does not require marking in EU countries

Chemical nature:
styrene-acrylic polymer emulsion

Typical properties:
Appearance: viscous liquid.
Dry residue: 49
 51% (1 g, 30 min. at 150 ºС)
pH level: 6.0 - 9.0 (at 20 ºС)
Viscosity: 5000
 15000 cps (Brookfield, 5/20 at 20ºC)
MFFT / TG: -1 / -3 ºС
Packing: 120 kg PET drums / 1000 kg IBC containers
Shelf life: 12 months at 5
 35 ºС
Frost resistance: store at positive temperatures
Security: no special conditions

Kemiline CE 756 EU does not contain a plasticizer or coalescent. Kemiline TA 332 is recommended as a thickener for paints and coatings.

Important conditions for storage and use of the product:

 the product has a shelf life of 12 months from the date of production indicated on the label and indicated in the certificates of analysis, when stored at a temperature of 5 to 35 oC, away from sunlight in a dry, cool place.

 the product must be stored under hygienic conditions to avoid microbiological attack, although it contains certain biocides. Addition of additional biocides may be required depending on site conditions such as high storage temperatures and suspected product contamination during handling. Bulk material storage tanks need to be checked and cleaned from time to time depending on the conditions.

 avoid direct contact of metal parts with this product during storage and use. It is recommended to keep storage tanks, IBCs and drums tightly closed to avoid moisture loss and to keep headspace saturated with water vapor to prevent skin formation at the top and protect the product from microbiological attacks.

 material packed in IBC and drums is recommended to be mixed before use. The product may form lumps and peel due to its film-forming nature. For this reason, it is recommended to strain through a coarse filter before use.

 handle the product with normal safety precautions. Material safety data sheets must be read before using the product. It is recommended to use personal protective equipment such as gloves and goggles when handling the product.

Без имени-1.png

Before using this product, we advise you to carefully read the Safety Data Sheet.

For more information, please contact us:
Phone +38 (048) 704 53 62

Serpa does not recommend the use of these products where patent or other rights may be infringed.

2015 — 2022 Serpa LLC 

Без имени-2.png
bottom of page